Motormax

RADIATOR COOLANT FOR MORE EFFICIENT COOLING SYSTEMS,PERFORMANCE AND ECONOMY

 

HOW DOES MOTOR MAX WORK?

Reduces Overheating When Towing: Whilst towing Caravans, Trailers, Horse Floats or Boats, by adding Motor Max to your radiator reduces the operating temperature of your engine, cooling system, automatic transmission, This in turn reduces heat in Air Conditioning and Radiator Cooling Systems. A/C Systems therefore operate more efficiently and at lower temperatures.

Faster Engine Warm-up: When cooling a system that uses a thermostat or other means of controlling water flow until a certain water temperature is obtained, Motor Max will absorb the heat of the engine parts, transferring heat evenly throughout the engine. When Motor Max is added to water it acts like a heat sink. The water temperature will rise faster, reducing the time for warm up. The heat is evenly transferred to all of the engine parts creating a more even warm up, reducing cold start-up wear and tear. Additionally, this translates into a big fuel saving, allowing equipment to be put into service sooner with faster warm-up.

Reduces Water Temperature: Once the thermostat opens up, Motor Max will transfer all of the heat it has absorbed into the radiator or cooling tower. Its ability to transfer this heat will now make the radiator work more efficiently to remove heat from the Motor Max-water mixture. Results vary depending on the size and volume of your entire water system. We have found for example, in a street driven vehicle containing a ratio of one (1) litre Motor Max to fifteen (15) litre water, that the mixture can reduce your water temperature from 105°C to 88°C. In a more stressed application such as a race car or piece of heavy equipment that runs at full throttle for an extended period, Motor Max should be mixed at a ratio of one (1) litre Motor Max to ten (10) litres water. Tests conducted with NASCAR Busch Grand National racecars with this ratio found temperatures to drop from 113°C to 93°C.

Reduces Internal Engine Parts Temperature: Acting like heat sink, Motor Max has the ability to remove heat form internal engine parts. Reducing the operating temperature of the internal parts of your engine has a major impact on the wear and tear of engine components. In engines, where high rpms are required, such as racecars, this becomes critical to the life span of components such as valve springs, wrist pins, cylinder walls and pistons. Increasing the life span of these components reduces costs when rebuilding and helps minimize failures.

Reduces Oil Temperature: Motor Max by reducing the temperature of the internal parts will also help to reduce oil temperatures. Motor Max will help to reduce temperatures by up to 17°C. A reduced oil temperature means less chance of oil breakdown and in turn decreases the chance of damage caused by poor lubrication.

Reduces Hot Spots In Engines: All engines have some variance in water temperature from front to back or side to side. Motor Max, with its ability to absorb heat and transfer it evenly, actually reduces the potential of hot spots and virtually eliminates steam pockets. Motor Maxhas shown to reduce the variance of temperature in hot spots by up to 22°C. The ability to reduce hot spots is vital in the search for horsepower. Controlling the hot spots now suggests that the window can be stretched just a bit further when seeking the last ounce of horsepower from performance engines.

Passenger Compartment and Engine Bay Temperature Reduction: Now that your engine and many of its components are running cooler, the reduced temperature translates to cooler engine bay and passenger compartment temperatures. This is vital in a racing application where cockpit temperatures can be as high as 66°C.

Reduces Engine Temperature Rise During Pit Stops and in Traffic Jams: Motor Max will also keep your water temperature lower in conditions where there is little or no airflow. With its ability to pull more heat out of the motor and into the radiator, Motor Max helps keep your engine cooler while idling.

Faster Cool Downs Between Rounds: Vital to all types of racing, Motor Max will allow your engine to cool faster between rounds. When used in heavy equipment, semi-trailers & ‘B’ Doubles, faster cool down results in added fuel savings. This allows for engines to be shut down sooner after reaching optimum cool down temperatures.

Easy to Clean Up and Environmentally Friendly: Motor Max is a plant-based product that is not toxic and biodegradable. Motor Max is not petroleum based and when accidentally spilled, it is very easy to clean up. For example, if accidentally spilled Motor Max works to actually breakdown and clean hydrocarbons on the surface. Motor Max is then easily cleaned up with any dry absorbent product and has no harmful effect to any surface. Motor Max actually evaporates faster and cleans up easier than just plain water. For racers and racetrack promoters, this is a big advantage allowing for faster clean up and enhanced track safety.Motor Max can be used as a cleaner in garage areas and racetrack applications to clean up grease and/ or fuel spill.

This is one of many products from Firefreeze Worldwide Inc.

MATERIAL SAFETY DATA SHEET

MOTOR MAX 

SECTION I – IDENTIFICATION

Manufacturer: Firefreeze Worldwide, Inc.

Address: 270 Route 46 East, Rockway, NJ 07866

Phone: 973-627-0722; Fax: 973-627-2982

Formulation#: JG302-DF (Formula 500)

Trade Name: Motor MAX

Product: Radiator Cooling Additive

SECTION II – INGREDIENTS AND HAZARD CLASSIFICATION

Components are classified trade secret. No components are believed to be hazardous or listed in NIOSH Recommendations for Occupational Safety and Health Standards, 1988, or are listed as hazardous by SARA, CERCLA or RCRA.

SECTION III – PHYSICAL/CHEMICAL CHARACTERISTICS

Vapor Pressure (mm Hg): same as water

Solubility in water: 100% Specific Gravity: 1.02 – 1.04

PH: 7.0 (neutral) Appearance/Odor: Opaque, fresh scent

SECTION IV – FIRE & EXPLOSION DATA

Flash Point: Not applicable Flammable Limits: Not applicable

LEL: Not applicable UEL: Not applicable

Extinguishing Media: Not applicable

Special fire fighting procedures: None

Unusual fire & explosion hazards: None

SECTION V – HEALTH HAZARD DATA

Route of Entry:

Inhalation: Yes Skin: Yes Ingestion: No

Signs and Symptoms of exposure:

Skin: Negligible hazard. Not a primary skin irritant.

Eyes: Not considered a primary ocular irritant.

Inhalation: Negligible

Ingestion: Do not ingest.

First Aid:

Skin: Rinse skin with soap and water after handling.

Eyes: Flush eyes with soap and water after handling.

Inhalation: Negligible. Remove to fresh air if there is irritation.

Ingestion: If accidentally swallowed, drink water and consult a physician if any irritation occurs.

SECTION VI – SAFE HANDLING & USE

Respiratory Protection: None required.

Ventilation: Under ordinary conditions of use for its intended purpose, no special ventilation is required.

Eye Protection: Wear eye goggles of safety glasses if needed to prevent reasonable probability of eye contact.

Protective Gloves: Wear general work gloves if there is a probability of prolonged skin contact to minimize any possible irritation.

Spill or lead procedures: Recoup as much of the product as possible. Rinse affected area with water.

SECTION VII – HAZARD CLASSIFICATION

Respiratory Protection: Non-hazardous UN Number: Not applicable

US DOT Hazard Class: Not regulated HMIS Rating: H-0 – R-0 – F-0

SECTION VIII – REGULATORY INFORMATION

NJ TSRN’s (New Jersey Trade Secret Registration Numbers): JG200-JG800

California Proposition 65:

Components present containing listed substances which the State of California has found to cause cancer, birth defects or other reproductive harm which require a warning under the state are: NONE.

MOTOR MAX 

Radiator Cooling Additive

GENERAL DESCRIPTION / USE

Motor MAX works to reduce water temperature, the temperature of internal engine components, it minimizes hot spots in engines, and in turn the passenger compartment and engine bay temperatures are reduced.

Motor MAX is non-toxic and biodegradable. It is non-corrosive and compatible with all internal engine parts, seals, hoses and accessory components.

RECOMMENDED MIXTURES

For use in racing, heavy equipment, towing, or high stressed applications where more cooling is needed run 1 litre Motor MAX to 10 litres of water.

For normal street driven use in cars, motor homes, street rods, etc. use 1 litre Motor MAX to 15 litres of water.

Motor MAX can be safely mixed with antifreeze. Motor MAX will mix with any other type of radiator additives in water only coolant systems.

CHARACTERISTICS

pH: pH is neutral 7.0

Flash Point: Negligible

Boiling Point: 205ºC

Odor: Mild, fresh scent. Does not contain d-limonenes

Appearance: Opaque in color

Water Solubility: Complete

Shelf Life: Indefinite when stored in closed containers between 5ºC – 49ºC

Residue: Product dissipates rapidly. Product leaves virtually no residue

SHIPPING CONTAINERS

1 Bottle 946ml

12 Bottles Per Carton

HANDLING & STORAGE

Store at room temperature. Avoid prolonged storage below 5ºC or above 49ºC. If frozen, return product to room temperature and allow to thaw before use. Product is freeze/thaw stable. Product is neutral. Rinse hands with soap and water after handling product. As with all chemicals avoid direct eye contact.